logo

λεπτομέρειες για τα προϊόντα

Created with Pixso. Σπίτι Created with Pixso. προϊόντα Created with Pixso.
Συσκευή δοκιμής μετρητών
Created with Pixso.

SW-5D Time-Base Frequency Instrument with 7 Selectable Standard Outputs 1.3" OLED Display and OCXO Temperature Deviation ≤ 0.05 ppm

SW-5D Time-Base Frequency Instrument with 7 Selectable Standard Outputs 1.3" OLED Display and OCXO Temperature Deviation ≤ 0.05 ppm

Ονομασία μάρκας: GENY
Αριθμός μοντέλου: SW-5D
MOQ: 1
τιμή: negotiate rates
Όροι πληρωμής: T/t, l/c, d/p, t/t
Ικανότητα εφοδιασμού: 10 τεμάχια/ 1 μήνα
Πληροφορίες λεπτομέρειας
Τόπος καταγωγής:
ΚΙΝΑ
Πιστοποίηση:
ISO, CE
Θερμοκρασία αναφοράς δοκιμής:
25℃
Ζεστή εκκίνηση:
27 δευτ.
Καυτή εκκίνηση:
1S
Η ευαισθησία του κρύου εκκίνησης:
-148dBm
Προεπιλεγμένη συχνότητα παλμού ρολογιού κρυστάλλου ταλαντωτή:
625kHz/s
Ακρίβεια συχνοτήτων ρολογιού κρυστάλλου ταλαντωτή::
≤4 × 10-7
Συσκευασία λεπτομέρειες:
Θήκες από κόντρα πλακέ
Δυνατότητα προσφοράς:
10 τεμάχια/ 1 μήνα
Επισημαίνω:

7 selectable standard outputs Time-Base Frequency Instrument

,

1.3" OLED display Frequency Standard Instrument

,

OCXO temperature deviation ≤ 0.05 ppm Clock Verification Instrument

Περιγραφή προϊόντων
SW-5D Time-Base Frequency Instrument
Precision instrument designed for electricity meter clock verification with high-stability time base and GPS synchronization.
Key Features
  • High-stability OCXO time base; frequency accuracy ≤ 4*10-7
  • GPS time sync and correction via Ethernet (second-level synchronization)
  • 7 selectable standard outputs: 0.5 Hz / 1 Hz / 100 kHz / 500 kHz / 625 kHz / 1 MHz / 2 MHz
  • Pulse input measurement: 0.1 Hz-1 MHz, with automatic daily time error calculation
  • 1.3" OLED display, simple keypad, remembers last output frequency
Technical Specifications
Time Base OCXO; temperature deviation ≤ 0.05 ppm at -20℃ to +60℃ (ref 25℃)
Default Output 625 kHz; 50% duty cycle; levels: High 4.5 V / Low 0.11 V (typ.)
GPS Performance Cold start ~29 s, hot start ~1 s; sensitivity: capture -148 dBm / tracking -165 dBm
Error Test Duration 1-100 s (default 60 s); displays measured input frequency and daily time error
I/O F-IN (frequency measurement), F-OUT (standard frequency output)
Communications RJ45 Ethernet (default IP 192.168.1.199, port 1234), RS-232 (reserved)
Power AC 220 V (fused), chassis ground terminal
Applications
  • Accuracy verification of internal clocks in multifunction energy meters
  • Laboratory and field time-base standard output and pulse frequency measurement
  • GPS-based time synchronization for calibration systems
Installation Guide
  • Connect F-OUT to system comm board J2 (adapter cable included)
  • Connect S-ANT to outdoor antenna for GPS time sync
  • Use Ethernet for IP/port configuration and standard time read/write
Ordering Information
  • Model: SW-5D Time-Base Frequency Instrument
  • Standard accessories: output adapter cable, AC power cord, user manual
  • Options: GPS antenna and extension cable, RS-232 cable